SPOOLMARGIN / PRINTER MODELS
Elegoo Neptune 4 Pro running cost
The Elegoo Neptune 4 Pro has an example price of $259.00 (entered by us, verify with the vendor) and draws roughly 100 W while printing. Amortized over an assumed 4,000-hour service life, that is $0.06 of machine allocation per hour; at the 2024 U.S. average electricity price of 16.32¢/kWh, energy adds another $0.02 per hour, for about $0.08 per hour combined.
- Example price (verify with vendor)
- $259.00
- Average power draw
- 100 W
- Build volume
- 225 x 225 x 265 mm
- Machine allocation (4,000 hr life)
- $0.06/hr
- Energy at 16.32¢/kWh
- $0.02/hr
- Combined machine + energy
- $0.08/hr
How this is calculated
Machine allocation = (purchase price − expected resale value) ÷ service life hours; this page assumes zero resale and a 4,000-hour service life. Energy = watts ÷ 1,000 × price per kWh. Both are cost-model assumptions, not a manufacturer specification; open the calculator to use your own service life, resale value, and electricity rate.
Worked quote: 120 g, 6 hour part on the Elegoo Neptune 4 Pro
- Filament: 120 g at $24.00/kg
- $3.20
- Machine time: 6 hr at $0.16/hr
- $1.10
- Electricity: 100 W at $0.16/kWh
- $0.11
- Labor: 15 min setup + 20 min finishing at $30.00/hr
- $17.50
- Packaging, delivery and overhead
- $10.00
- Payment fees (9.5% + $0.25 on the suggested price)
- $6.30
- Suggested price at 40% target margin
- $63.68
The filament, machine, and electricity lines already include the 10% failed-attempt allowance, which adds $0.44 to this job. Fees use the calculator's typical Etsy profile (9.5% + $0.25); other fields are the calculator's defaults. Computed with the same calculateJob function as the calculator.
Page reviewed 2026-10-05. Data source: Purchase price and power draw are example figures entered by us; no vendor source is stored in this site, so verify the price with the vendor. Electricity: U.S. Energy Information Administration (EIA-861), 2024 U.S. average.
Open the calculator with the Elegoo Neptune 4 Pro's numbers →